Electronics


AVR 4311
-
Video Features
-
Supports HDMI 1.4a with 3D
-
7 x HDMI in / 2 x HDMI out with GUI (Graphical User Interface)
-
One-cable HD solution
-
All sources are up-scaled to 1080P by Anchor bay Hi-bit ABT2015 scalar
-
Audio Return Channel
-
Deep Color
-
“x.v.Color”
-
Auto Lipsync
-
HDMI control function
-
Audio Features
-
Dynamic Discrete Surround Circuit, D.D.S.C.-HD
-
HDMI Clock Control via DENON LINK 4th
-
Fully discrete, identical quality and power for all 9channels
-
9ch Discrete Mono Amp Construction
-
4 ohm Speaker Drivability
-
High definition audio support
-
Dolby TrueHD
-
dts-HD Master Audio
-
-
Supports Dolby Pro Logic IIz processing
-
Minimum Signal Path for clear audio and video signal
-
Direct Mechanical Ground Construction
-
Audyssey multiple subwoofer calibration
-
Dual subwoofers preout
-
Audyssey DSX Processing (11.2 ch)
-
Direct play for iPod and iPhone via USB
-
USB, Direct Digital connection for superior digital to analogue conversion
-
Dolby Volume
-
Stable power supply for high-quality sound playback
-
Enhanced network capability
-
AirPlay upgradeable (see download page)
-
Internet Radio
-
Network audio/photo streaming via Ethernet
-
Pandora, flickr, Napster and Rhapsody online support (where applicable)
-
Party Mode Plus
-
FLAC HD, High-resolution audio format
-
Compatible with Windows® 7
-
Web interface for web control & setup
-
Convenience features
-
iPhone app
Newly developed pre memory remote control handset with LCD
-
Remote Setup Guidance
-
Simultaneous playback on two HDMI channels
-
2-line fluorescent display on front panel
-
Sleep timer function
-
Audio Delay function(max. 6 frames or 200 msec)
-
Custom Installation features
-
3 source / 3 zone capability
-
iPod and iPhone playback for Zone 2 / Zone 3
-
PCM playback in Zone 2 / Zone 3
-
Power Amp Assign function
-
Muting level settings (Full/-40dB/-20dB)
-
Audio level memory, capable of correcting different signal levels for each input device
-
Variable subwoofer crossover switching
-
RS232, AMX, Crestron third party control support
-
PC and iPhone setup via Ethernet (web control)
-
Remote Access & Maintenance
-
IP Control
-
Audyssey installer Program Ready
-
Lower power consumption at stand-by 0.1 W(Standby)
-
Main Specifications
-
Power amplifier section
-
Rated output *THD figures are power amp stage values.
-
Front L/R
-
140 W + 140 W (8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
-
170 W + 170 W (6 ohms, 1 kHz, THD 0.7%)
-
-
Center
-
140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
-
170 W(6 ohms, 1 kHz, THD 0.7%)
-
-
Surround L/R
-
140 W + 140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
-
170 W + 170 W(6 ohms, 1 kHz, THD 0.7%)
-
-
Surround Back L/R
-
140 W + 140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
-
170 W + 170 W(6 ohms, 1 kHz, THD 0.7%)
-
-
Front Height/Front Wide
-
140 W + 140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
-
170 W + 170 W(6 ohms, 1 kHz, THD 0.7%)
-
-
Preamplifier section
-
Input sensitivity/impedance 200 mV / 47 kÙ/kohms
-
Frequency response 10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
-
S/N Ratio 102 dB (IHF-A weighted, DIRECT mode)
-
General
-
Power supply AC 230 V, 50 Hz
-
Power consumption 780 W (Standby 0.1 W)
-
Dimensions (W x H x D) 434 x 171 x 414 mm
-
Weight 17.3 kg